FAST FAIR LW - MARINE EPOXY FILLER DATA SHEET
Product Data Sheet
FAST FAIR Light Weight Marine Epoxy Filler
Fast Fair LW is a non-volatile, low-density two-component epoxy filler based on specifically modified epoxy. It has superior adhesion to steel, aluminium, GRP and composite materials, providing a faster application efficient system.
Excellent water, salt spray and detergent resistance. Superior adhesion to all substrates.
Low density, exothermic system and easy to sand. Advanced physical properties.
For filling and fairing the surface to fill defects and provide a smooth even surface profile.
Suitable for use above and below the waterline, light engineering projects, including moulds for manufacture and fairing.
Finish - Flat.
Colour - Brown.
SG - 0.71 grms/ltr.
Solid vol. - 99%.
Dry to touch - 2 hours approximately at 20C.
Dry to sand - 8 hours approximately at 20C.
Shore D. - 64~66.
Base - Brown 1 part by volume.
Converter - White 1 part by volume.
Thoroughly mix material to a uniform brown colour with no streaks in the mix.
Induction time - None.
Application - Fairing knife/blade and trowel.
Pot Life - 35 minutes at 25C.
Method - Apply the filler at 15-25 microns WFT. Sand between coats with P60/P80/P120 grit sandpaper. Remove all sanding residue before proceeding.
Substrate - Fast Fair LW should only be applied to a correctly primed surface with epoxy primer.
Thinners - Do not add thinners.
SUPERYACHT PAINTERS LTD 24-06-21